manualshive.com logo in svg

Sony HAR-D1000 - Hard Disc Audio Recorder, Руководство по обслуживанию

Поделиться
Скачать
Sony HAR-D1000 - Hard Disc Audio Recorder Скачать руководство пользователя страница 15

15

HAR-D1000

Microcomputer Version Display

Procedure:

1.

Enter the test mode, then turn the 

[ALBUM]

 dial to display “<Version> 1”, and press the 

[ALBUM]

 dial.

2.

The [MC] version is displayed, and then rotate the 

[ALBUM]

 dial.

The message <TA> version is displayed. Rotate the 

[ALBUM]

 dial again and <CD>, <CDM>, <DISP> and <TM> versions are displayed.

3.

Press the 

[ALBUM]

 dial to display [MMI] version.

4.

Press the 

[ALBUM]

 dial to display [HD] version.

5.

To exit from the mode, press the 

[ALBUM]

 dial.

FL Display Test/LED display test

Procedure:

1.

Enter the test mode, then turn the 

[ALBUM]

 dial to display “<FLD> 2”, and press the 

[ALBUM]

 dial.

2.

All segments of fluorescent display tube turn on fully, and LED (HDD) turn on.

3.

Pressing the 

[ALBUM]

 dial cause almost half segments and LED (HDD) to turn off.

4.

Press the 

[ALBUM]

 dial and the pattern of segments changes to another.

5.

To exit from the mode, press the 

[ALBUM]

 dial.

Key/Jog Input Test

Procedure:

1.

Enter the test mode, then turn the 

[ALBUM]

 dial to display “<Key, Jog> 3”, and press the  

[ALBUM]

 dial. The message “Key = 21” is displayed.

2.

Clockwise rotation of the 

[ALBUM]

 dial moves the peak level meter up, or counterclockwise rotation of the 

[ALBUM]

 dial moves peak

level meter down.

3.

Press the buttons in order and the number of Key decreases while turning off segments of fluorescent display tube. And when all buttons
were pressed, “Key OK!” will be displayed.

4.

To exit from the mode, press the 

[ALBUM]

 dial.

Ver 1.1  2001.12

Содержание HAR-D1000 - Hard Disc Audio Recorder





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды