Sony HANDYCAM HVR-M35U Скачать руководство пользователя страница 94

Страница: 94 / 112

Chapter 6

Maintenance

Chapt

ain
te

nan

Warning Indicators and Messages

The following alarm messages will appear together with the alarm indicators. Take corrective action according to the
displayed message.

Alarm Messages

Item

Message

Cause/Corrective Action

Moisture
condensation

Moisture condensation. Eject the cassette.

See page 97 for details.

Moisture condensation. Turn off for 1H.

See page 97 for details.

Cassette/Tape

Insert a cassette.

See page 31.

Reinsert the cassette.

Check for damage to the tape or other
irregularities.

The tape is locked –check the tab.

See page 30.

The tape has reached the end.

—

Audio dubbing

Cannot add audio. INPUT SELECT is set to HDV/DV.

—

Not recorded in DVCAM mode. Cannot add audio.

—

Cannot add audio.

You cannot add audio unless the recorded
audio format is 32 kHz (4-channel, 12 bit).
Make sure that [60i/50i SEL] in the [OTHERS]
menu is set correctly.

Cannot add audio on the blank portion of a tape.

—

HDV recorded tape. Cannot add audio.

—

Cannot add audio. “HDV/DV SEL” is set to HDV.

—

Others

Cannot record due to copyright protection.

—

Change to correct tape format.

This is an unsupported format and cannot be
played back.

No output image in “HDV/DV SEL”. Change format.

Stop playback or signal input, or change the
[HDV/DV SEL] setting

(page 72)

Dirty video head. Use a cleaning cassette.

See page 95.

Unplug power cable.

—

Reinsert the cassette.

—

Invalid input signal.

The signal that has been input to the unit is
invalid. Check the input signal.

Power voltage error.

—

Содержание HANDYCAM HVR-M35U

















































































































Результаты поиска

Содержание HANDYCAM HVR-M35U

Отзывы:

Похожие инструкции для HANDYCAM HVR-M35U

Бренды по названию

Популярные бренды

Sony HANDYCAM HVR-M35U, Руководство по эксплуатации

Результаты поиска

Содержание HANDYCAM HVR-M35U

Отзывы:

Похожие инструкции для HANDYCAM HVR-M35U

Бренды по названию

Популярные бренды