Sony Handycam HDR-UX10E, Руководство по эксплуатации

Страница: 118 / 148

118
Warning indicators and messages
If indicators appear on the LCD screen or in
the viewfinder, check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C: (or E:) ss : ss (Self-diagnosis
display)
C:04: ss
• The battery pack is not an “InfoLITHIUM”
battery pack (H series). Use an
“InfoLITHIUM” battery pack (H series)
(p. 128).
• Connect the DC plug of the AC Adaptor to
the DC IN jack of your camcorder securely
(p. 20).
C:13: ss
• The disc is faulty. Use a compatible disc
with your camcorder (p. 14).
• The disc is dirty or has scratches on it.
Clean the disc with a soft cloth (p. 126).
C:32: ss
• Symptoms that are not described above
have occurred. Remove and insert the disc,
then operate your camcorder again.
• Remove the power source. Reconnect it
and operate your camcorder again.
E:20: ss / E:31: ss / E:61: ss /
E:62:
ss
/ E:91:
ss
/ E:94:
ss
• A malfunction that you cannot service has
occurred. Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts from
“E:”
101-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
(Warning indicator pertaining to
discs)
Slow flashing
• No disc is inserted. *
• Less than 5 minutes remains for recording
movies on a disc.
• The disc cannot be read or written, because
the single-sided disc is inserted inside out.
Fast flashing
• An unrecognizable disc is inserted. *
• A finalized disc is inserted into your
camcorder during recording standby.
• The disc is fully recorded. *
• The disc recorded in the different TV color
system from your camcorder is inserted
when the
(Movie) lamp lights up.
*
Z (You need to remove the disc)*
Fast flashing
• An unrecognizable disc is inserted.
• The disc is fully recorded.
• An error might have occurred with the disc
drive in your camcorder.
• A finalized disc is inserted into your
camcorder during recording standby
(p. 71).
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating, environment,
or battery conditions, E may flash, even if
there are approximately 20 minutes
remaining.
Self-diagnosis display/Warning
indicators