2
Set the camcorder onto the
“Handycam” Station Cradle.
Turn on the camcorder by
opening the LCD screen.
Connect the
(USB) jack of the
“Handycam” Station Cradle or the
Dedicated USB Terminal Adaptor
and the computer with the USB
cable (supplied).
The [USB SELECT] screen appears on
the camcorder screen automatically.
Touch [
USB CONNECT] on the
camcorder screen.
If the [USB SELECT] screen does not
appear, touch
(MENU)
[USB
CONNECT] (under [OTHERS]
category).
Click [Continue] on the computer
screen.
Read the terms of the license
agreement carefully. If you agree
to the terms, change to , and
then click [Next]
[Install].
Follow the on-screen instructions
to install the software.
Depending on the computer, you may
need to install third party software. If
the installation screen appears, follow
the instructions to install the required
software.
Restart the computer if required to
complete the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
Other icons may appear.
No icon may appear depending on the
installation procedure.
The “Handycam” Handbook is not
installed in this procedure (p. 51).
