Sony Handycam HDR-FX1E, Руководство по эксплуатации

Страница: 64 / 112

Using the Menu
64
REMAINING
DISP OUTPUT
b
Note
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while
[V-OUT/PANEL] is selected.
REMOTE CTRL
b
Note
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
G AUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you set the POWER switch to CAMERA or VCR with a
cassette inserted, and your camcorder calculates the remaining
amount of tape.
• After you press
N
(play) or DISPLAY/BATT INFO.
ON Select to always display the remaining tape indicator.
G LCD PANEL Select to show indicators such as the time code on the LCD screen and
in the viewfinder.
V-OUT/PANEL Select to show indicators such as the time code on the TV screen, LCD
screen, and in the viewfinder.
G ON
Select when using the Remote Commander supplied with your
camcorder.
OFF Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.