Sony Handycam HDR-FX1E, Руководство по эксплуатации

Страница: 61 / 112

U
si
n
g t
h
e
M
e
nu
Using the Menu
61
• Disconnect the i.LINK cable before setting [i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize the video signal from this camcorder.
TV TYPE
You need to convert the signal depending on the TV connected.
z
Tip
• When you view pictures recorded with [DV WIDE REC] on the (CAMERA SET)
menu set to [ON] on a 4:3 standard TV, pictures may appear as they are in height, but are
compressed in width depending on the TV. If you view the recorded pictures on such type
of 4:3 standard TV, set [DV WIDE REC] to [OFF] before recording.
A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
G 16:9
Select to view your pictures on a 16:9 wide TV.
The recorded pictures will appear as follows:
4:3
Select to view your pictures on a 4:3 standard TV.
The recorded pictures will appear as follows:
G
OFF Select when you are not using the Signal conversion function.
ON ( ) To output analog images and sound in digital format using your
camcorder.
The analog signal input to the AUDIO/VIDEO jack of your camcorder
will be converted and output from the i.LINK Interface of your
camcorder.
For details, see page 81.
When HDV pictures
are played back When DV pictures
are played back
When HDV pictures
are played back When DV pictures
are played back