9
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
USB LUN Setting
Improves compatibility with external
devices by limiting the functions of the USB
connection.
Multi
Use this setting for ordinary operations.
Single
Try this setting only if you cannot connect to
an external device.
Notes
When you use “PMB Portable” to upload
images to a service on the Internet, make sure
to set [USB LUN Setting] to [Multi].
Disc Burn
See page 57.
Beep
On
A melody sounds when you start/stop
recording, or operate the touch panel.
Off
Cancels the melody.
LCD Brightness
You can adjust the brightness of the LCD
screen.
Normal
Normal setting (normal brightness).
Bright
Select this when the LCD screen is not bright
enough.
Tips
This adjustment does not affect the recorded
images in any way.
Your Location (HDR-CX560VE/
CX700VE)
See page 49.
GPS Setting (HDR-CX560VE/
CX700VE)
You can select whether the camcorder
receives or does not receive GPS signals
(p. 46).
On
Receives GPS signals.
Off
Does not receive GPS signals.
Notes
If you set [GPS Setting] to [Off], the location
information that has previously been recorded
will be invalid. The location information will
not be recorded until triangulating is finished
successfully after you switch the [GPS Setting]
to [On].
REC Lamp (Recording lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
