GB
18
Turning the power on
• To turn off the power, close the LCD monitor. If the viewfinder is pulled
out, retract it (models with the viewfinder (FDR-AX33/AXP33/AXP35)
only).
• To set the date and time again, select
[Setup]
[
Clock
Settings]
[Date & Time Setting]. (In case you haven’t used your
camcorder for several months)
• To turn off the operating sound, select
[Setup]
[
General Settings]
[Beep]
[Off].
1
Open the LCD monitor of your camcorder and turn
the power on.
• You can also turn on the camcorder by pulling out the viewfinder
(models with the viewfinder (FDR-AX33/AXP33/AXP35) only).
2
Following the instructions on the LCD monitor, select
the language, the geographical area, Daylight
Savings or Summer Time, date format, and the date
and time.
• To go to the next page, touch [Next].
Touch the button on the LCD monitor.
