Customizing Your Camcorder
60
Using the
(OTHERS) menu
– WORLD
TIME, etc.
You can select items listed below on the
OTHERS menu. To select these items, see
“Changing the menu settings” (p. 44).
The default settings are marked with
G
. The
settings you can adjust vary depending on the
power mode of your camcorder. The screen
shows the items you can operate at the moment.
Unavailable items will be grayed out.
WORLD TIME
You can adjust the time difference when using your camcorder abroad. Set the
time difference by touching
/
, and the clock will be adjusted in
accordance with the time difference. If you set the time difference to 0, the clock
returns to the originally set time.
BEEP
A.SHUT OFF
b
Note
• When you connect your camcorder to the wall socket, [A.SHUT OFF] is automatically set
to [NEVER].
COMMANDER
OTHERS
WORLD TIME
BEEP
A. SHUT OFF
COMMANDER
DISPLAY
REC LAMP
EXEC
RET.
STBY
G
MELODY
Select to sound a melody when you start/stop recording, operate the
touch panel, or when an unusual condition occurs on your camcorder.
NORMAL
Select to sound a beep instead of the melody.
OFF
Select to cancel the melody, the beep sound, the shutter sound or the
confirmation beep sound for operation on the touch panel.
G
5min
Select to activate Auto shut off. When approximately 5 minutes have
elapsed while you do not operate your camcorder, the camcorder is
automatically turned off to prevent the battery from becoming
consumed.
NEVER
Select to deactivate Auto shut off.
G
ON
Select to use the Remote Commander supplied with your camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
