34
Recording (Continued)
1
Turn the POWER switch
A
until
the
(Movie) lamp lights up.
2
Press START/STOP
B
(or
C
).
To stop recording, press START/STOP
again.
1
Turn the POWER switch
A
until
the
(Still) lamp lights up.
2
Press PHOTO
F
lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).
appears next to
. When
disappears, the image has been
recorded.
b
Notes
• You cannot record still images on a disc.
z
Tips
• See page 11 for the recordable time of movies, and page 77 for the number of recordable still images.
• You can record still images by pressing PHOTO
F
during movie recording (Dual Rec, p. 36).
•
appears when [
INDEX SET] is set to [ON] (the default setting) during movie recording (p. 76).
• A frame is shown on the detected face, and the detected face image is sharpened automatically when
[FACE DETECTION] is set to [ON] (
) (the default setting) (p. 76).
• You can switch recording between movies and still images by touching
(HOME)
D
(or
E
)
t
(CAMERA)
t
[MOVIE] or [PHOTO].
• You can create still images from recorded movies (p. 49) (DCR-DVD910E).
Movies
[STBY]
t
[REC]
Still Images
Flashing
t
Lights up