Sony Handycam CCD-TR930 страница 57 Скачать руководство пользователя

Страница: 57 / 72

Additional Information

Trouble check

Symptom

Recording stops in a few
seconds.

The cassette cannot be
removed from the holder.

{

and

indicators flash and

no function except for cassette
ejection works.

The counter, date or time
indicator is flashing.

The tape does not move when
a video control button is
pressed.

The SteadyShot function does
not activate.

The autofocusing function
does not work.

The fader function does not
activate.

No sound or only a low
sound is heard when playing
back a tape.

Excessive high-pitched sound
is heard.

The date or time indicator
disappears.

Cause and/or Corrective Action

• The START/STOP MODE switch is set to 5 SEC or ANTI

GROUND SHOOTING

Set it to

. (p. 15)

• The battery is dead.

Use a charged battery pack or the AC power adaptor.
(p. 6, 22)

• Moisture condensation has occurred.

Remove the cassette and leave the camcorder for at least
1 hour. (p. 52)

• You pressed DATE and TIME together for more than 2

seconds.

The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.

• The lithium battery is weak or dead.

Replace the lithium battery with a new one. (p. 46)

• The POWER switch is set to CAMERA or OFF.

Set it to VTR.

• The tape has run out.

Rewind the tape or use a new one. (p. 20)

• STEADY SHOT is set to OFF.

Set STEADY SHOT to ON. (p. 45)

• The SteadyShot function does not work when the wide

mode is set to 16:9 FULL.

• FOCUS is set to MANUAL.

Set it to AUTO. (p. 31)

• Shooting conditions are not suitable for autofocus.

Set FOCUS to MANUAL to focus manually. (p. 31)

• START/STOP MODE is set to 5 SEC or ANTI GROUND

SHOOTING

Set it to

. (p. 15)

• A title is displayed.

Stop superimposing the title.

• The stereo tape is played back with HiFi SOUND set to 1

or 2 in the menu system.

Set to STEREO in the menu system. (p. 26)

• The picture has been recorded with WIND set to ON in the

menu system.

When there is no wind, set it to OFF. (p. 25)

• Reset the date and time. (p. 47)

(to be continued)

Содержание Handycam CCD-TR930









































































Результаты поиска

Содержание Handycam CCD-TR930

Отзывы:

Похожие инструкции для Handycam CCD-TR930

Бренды по названию

Популярные бренды

Sony Handycam CCD-TR930, Руководство по эксплуатации

Результаты поиска

Содержание Handycam CCD-TR930

Отзывы:

Похожие инструкции для Handycam CCD-TR930

Бренды по названию

Популярные бренды