Sony H.ear go SRS-HG1, Руководство пользователя, Страница: 197 / 265

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
About High-Resolution Audio format files
High-Resolution Audio, which is typically 96 kHz/24 bit or higher, is made by digitally sampling an original analog audio source.
The number of times at which sampling is performed (in one-second increments) is called the sampling frequency, which is
expressed in hertz or “Hz”. Digitizing refers to the audio process where the sampled signal is converted (or quantized) into binary
digits, consisting of 1's and 0's, and expressed as “bits”. The higher the number of bits, the closer the sample is to the original
source. CDs are standardized at 44.1 kHz/16 bit, but there is no single standard for High-Resolution Audio.
An alternative way of digitizing an analog source is a method called DSD (Direct Stream Digital) which captures sound information
as a sequence of single bit values with an extremely high sampling rate of either 2.8 MHz or 5.6 MHz. This is approximately 64 or
128 times the sampling rate of CD audio and is simply known as DSD 2.8 MHz or DSD 5.6 MHz. For some engineers, this is the
closest a digital file sample can get to an original analog source.
4-589-712-11(2) Copyright 2016 Sony Corporation
181