Sony h.ear go 2, Руководство пользователя, Страница: 103 / 230

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Connecting two speakers (Speaker Add function)
By using the Speaker Add function on the h.ear go 2 (SRS-HG10) , you can enjoy more expanding stereo sound even
when the speaker is not connected to a network.
Two h.ear go 2 (SRS-HG10) are required.
Place the speakers at a distance 1 m (3 ft) or less from each other, and then turn on them.
The (power) indicators light up in green.
1
On each speaker, press the FUNCTION button repeatedly until the BLUETOOTH indicator flashes.
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last
connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically and
the BLUETOOTH indicator stays lit. When you want to connect another BLUETOOTH device, terminate the current
BLUETOOTH connection by operating the currently connected BLUETOOTH device.
2
Press and hold the STEREO PAIR button on the rear of one of the speakers until beeps are heard, which
informs you to start setting the function.
The (right)/ (left) indicators flash for a few seconds, and then light up.
3
Press and hold the STEREO PAIR button on the rear of the other speaker until beeps are heard, which
informs you to start the connection.
The (right)/ (left) indicators flash for a few seconds, and then light up.
4
103