Sony GXDL52H1 - 52" LCD Flat Panel Display, Руководство пользователя

Страница: 65 / 311

17
GB
GB
Optional Adaptors
The terminal of the OPTION slot
9
(page 10) on the
side of the equipment is a slot-in type. It can be
switched to the following optional adapter (not
supplied).
For details on installation, consult your Sony dealers.
For details on the optional adaptors for system
expansion, BKM-FW series, see each instruction
manual.
COMPONENT/RGB INPUT Adaptor BKM-
FW11
1 Y/G, P
B
/C
B
/B, P
R
/C
R
/R IN (BNC) : Connects to
the analog RGB signal or component signal output
of a piece of video equipment or PC.
2 HD, VD IN (BNC) : Connects to the
synchronization signal output of a PC.
When inputting a component signal, be sure not to input sync
signals to the HD and VD connectors. If you do so, the
picture may not be displayed properly.
3
AUDIO (Stereo mini jack) : Inputs an audio
signal. Connects to the audio output of a piece of
video equipment or PC.
HDMI INPUT Adaptor BKM-FW15
1 HDMI 1/HDMI 2 IN : HDMI (High-Definition
Multimedia Interface) provides an interface
between the display and any HDMI-equipped
audio/video equipment, as well as PC. You can
enjoy enhanced or high-definition video, and two-
channel digital audio. You can also connect a
piece of DVI-equipped equipment to your display
by using an HDMI-to-DVI cable (not supplied).
The appropriate mode for a piece of audio/video
equipment or PC is automatically selected in
accordance with the connected equipment.
Be sure to use only an HDMI cable (not supplied) that bears
the HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
HD-SDI/SDI INPUT Adaptor BKM-FW16
Connects to the HD-SDI signal output of a piece of
video equipment.
For details, see the instruction manual of the BKM-
FW16.
MONITOR CONTROL Adaptor BKM-FW21
1 CONTROL S IN/OUT (Mini jack): You can
control pieces of multiple equipment with a single
remote control when the display is connected to
the CONTROL S connector of the video
equipment or another display. Connect the
CONTROL S OUT connector on this adaptor to
the CONTROL S IN connector of the other
equipment, and connect the CONTROL S IN
connector on this adaptor to the CONTROL S
OUT connector of the other equipment.
2 REMOTE (D-sub 9-pin): This connector allows
remote control of the display using the RS-232C
protocol. For details, contact your authorized
Sony dealers.
• The REMOTE connector and the REMOTE (LAN)
connector 3 (page 9) on the side of the equipment
cannot be used at the same time.
• When using the REMOTE connector, select “Option” in
“Network Port”. (page 31)
STREAMING RECEIVER Adaptor BKM-FW50
For details, see the instruction manual of the BKM-
FW50.
You cannot use the REMOTE connector of this display if the
adaptor is connected to this display.
Note
Note
Note
Notes