Sony GTK-PG10, Руководство по эксплуатации

Страница: 31 / 100

31
GB
GTK-PG10 UC2 (GB/FR/ES) 4-747-379-11(1)
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
Tweeter (L + R) and Woofer (mono)
With 4 ohm loads, both channels driven,
at 60 Hz – 20,000 Hz; rated 7 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
Speaker section
Tweeter:
40 mm (5/8 in) x 2, cone type
Woofer:
180 mm (7 1/8 in) x 1, cone type
USB section and supported
audio formats
Supported bit rate:
MP3 (MPEG1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA: 32 kbps – 192 kbps, VBR
Sampling frequencies:
MP3 (MPEG1 Audio Layer-3):
32/44.1/48 kHz
WMA: 44.1 kHz
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 4.2
Output:
BLUETOOTH Standard Power Class 2
Maximum output power:
< 20.0 dBm
Maximum communication range:
Line of sight approx. 10 m (33 ft) 1)
Frequency band:
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method:
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
2)
:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported codecs:
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
LDAC
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
2)
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.