Setting Up the LCD Projection TV
46
KDF-WE/WF655
2-059-370-
14
(2)
DVD Player with
Component
Video Connectors
Use this hookup if:
❑
Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player’s Y, B-Y and
R-Y jacks to the LCD projection TV’s Y, P
B
and P
R
jacks. Use the HD/
DVD IN 5 or 6 connections.
2
Using an audio cable, connect the DVD player’s AUDIO OUT jacks to
the LCD projection TV’s AUDIO IN jacks. Be sure to use the same row
of inputs that you used for the video connection (HD/DVD IN 5 or 6).
✍
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, C
B
and C
R
, or Y, P
B
and P
R
. If so, connect the cables to like colors.
IN
OUT
Y
P
B
P
L
R
AUDIO
R
HD/DVD IN
(1080i/720p/
480p/480i)
5
6
CONTROL S
Component video cable
(not supplied)
Rear of LCD projection TV
Audio cable (not supplied)
DVD player
AUDIO-R (red)
AUDIO-L (white)
Y
P
B
P
R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
✍
To take advantage of the Wide Mode, set the DVD player’s aspect
ratio to 16:9. For details, refer to the operating instructions supplied
with your DVD player.
01COV.book Page 46 Thursday, February 17, 2005 8:01 PM
