Setting Up the LCD Projection TV
32
KDF-WE/WF655
2-059-370-
14
(2)
Cable or Antenna
For best results, use one of the following connections if you are
connecting a cable or an antenna and you:
❑
Do not need a cable box to unscramble channels. (If you have a cable
box, see pages 34 to 35.)
Do not intend to connect a VCR. (If you have a VCR, see pages 39 and
40.)
The connection you choose depends on the cable type you have in your
home, as described below.
75-ohm coaxial cable (usually found in newer homes)
Cable Type
Connect As Shown
VHF Only or
combined
VHF/UHF
Cable
300-ohm twin lead cable (usually found in older homes)
Cable Type
Connect As Shown
VHF Only or
UHF Only or
combined
VHF/UHF
75-ohm coaxial and 300-ohm twin lead cable (found in some homes)
Cable Type
Connect As Shown
VHF and UHF
75-ohm coaxial
cable
Rear of LCD
Projection TV
VHF/UHF
75-ohm coaxial
cable
CABLE
Rear of LCD
Projection TV
Rear of LCD Projection TV
Antenna connector
(not supplied)
300-ohm twin lead cable
VHF/UHF
Rear of LCD
Projection TV
75-ohm coaxial cable
VHF/UHF
U/V mixer
(not supplied)
300-ohm twin lead cable
01COV.book Page 32 Thursday, February 17, 2005 8:01 PM