NAS-SC55PKE.GB.3-300-262-
13
(1)
1
GB
You can use the “GIGA JUKE” Wireless Player
to play audio data stored on your “GIGA JUKE”
Music Server.
Before you can do this, you must first connect
the “GIGA JUKE” Wireless Player to the “GIGA
JUKE” Music Server.
This operation is performed on the “GIGA
JUKE” Wireless Player.
Note
If standby mode on the “GIGA JUKE” Music Server
is set to “Standard (power save)”, the “GIGA JUKE”
Wireless Player will not be able to connect to the
“GIGA JUKE” Music Server.
/
/
/
/
ENTER
HOME NETWORK
1
Press HOME NETWORK on the
“GIGA JUKE” Wireless Player.
2
Confirm that the name of the “GIGA
the “GIGA
JUKE” Music Server (e.g., [NAS-
S55HDE]) appears in the server
selection display, and then press
ENTER.
If the name of the “GIGA JUKE” Music Server does not appear,
press
to select [Update info], and then press ENTER.
3
Press
/
to select the item you
want to play.
You can select from [Playlist]*, [Artist]*,
[Album]*, [Genre]*, [Year]*, [All tracks]*, or
[Select server].
Press
to go to the next directory up.
If you press
after reaching the highest
directory, the display returns to the
playback window.
Press
to go to the next directory down.
* Items are displayed in the language that is set on the
“GIGA JUKE” Music Server.
Note
If the connected “GIGA JUKE” Music Server
contains a large amount of audio data, it may take
a while for the display to change while the unit is
searching for a track.
4
Press ENTER or
to switch the
display, and then press
/
to
select the track you want to play.
The unit starts playing the selected track and
the playback display appears.
Adjust the volume of the unit.
Playing audio data stored on the “GIGA JUKE” Music
Server through the “GIGA JUKE” Wireless Player
