Sony Giga Juke NAS-SC500PK Скачать руководство пользователя страница 49

Страница: 49 / 203

NAS-SC500PK.GB.4-114-863-

(1)

“GIGA JUKE”

usic S

ver

Preparation



(power)

button

Connect the power cord to a wall

outlet.

The unit automatically turns on, makes the

initial settings, and then turns off.

If the clock has not been set, the clock setting

display appears. In this case, set the clock

(page 29).

If no operation is made for one minute at this

time, a demonstration video starts playing

automatically. To disable the demonstration,

set the clock.

Press



(power).

The unit turns on.

A pop-up window appears in the top left part

of the display to show the network connection

status. This window automatically disappears

after a while. For details on the network

connection and setup, refer to the supplied

leaflet “Setup Guide” or the “Network

connection and setup” section in this manual

(page 98).

WARNING

Do not disconnect the power cord while the unit is

making the initial settings. Doing so may cause the

unit to malfunction.

To turn off the power

Press the



(power) button on either the remote

control or the main unit. The power may not turn

off immediately. If it does not, this indicates that

the unit is analyzing the music data on the HDD

(hard disk drive) (page 72). If you want to cancel

the analysis and turn off the power immediately,

press



. If you want to turn the power back on,

press the



(power) button.

As long as the unit is active as a server and the

client device is playing audio data, the server

function remains active and the power stays

on even if you press the



(power) button to

turn the unit off (the display turns off and the

illumination panel slowly flashes). Press



cancel the server function and turn off the unit.

WARNING

Do not disconnect the power cord while the unit

is turned on (the On/Standby indicator (page 18)

is lit up in green) or is analyzing music data (the

On/Standby indicator is lit up in orange and the

illumination panel (page 18) slowly flashes). Doing

so may cause the unit to malfunction.

Tip

This unit has two starting modes; Quick start-up mode

and Standard (power save) mode. See “Setting the standby

mode” on page 125 for details.

About operation modes

This unit has four operation modes: normal, quick

start-up standby, standard (power save) standby

and automatic analysis.

When the unit is set to quick start-up standby

mode, the internal fan will turn on every now and

then even when the power is turned off. This is

normal and is not a malfunction.



Normal operation mode

The unit enters this mode when it is turned on.

Turning on the power

Содержание Giga Juke NAS-SC500PK












































































































































































































Результаты поиска

Содержание Giga Juke NAS-SC500PK

Отзывы:

Бренды по названию

Популярные бренды

Sony Giga Juke NAS-SC500PK, Руководство по эксплуатации

Результаты поиска

Содержание Giga Juke NAS-SC500PK

Отзывы:

Бренды по названию

Популярные бренды