Sony Giga Juke NAS-SC500PK, Руководство по эксплуатации

Страница: 137 / 203

NAS-SC500PK.GB.4-114-863- 11 (1)
1
GB
“GIGA JUKE”
W
ireless P
la
yer
When you use an AOSS-incompatible wireless
LAN access point, you can set the connection
manually.
Before performing the setup operation on the
“GIGA JUKE” Wireless Player, connect the
wireless LAN access point to the “GIGA JUKE”
Music Server (“Searching the access point and
setting up a wireless network” on page 101 in the
“GIGA JUKE” Music Server section), and confirm
the server function of the “GIGA JUKE” Music
Server is active (“To check the server settings”
on page 113 in the “GIGA JUKE” Music Server
section).
Note
You may encounter setup difficulties if the unit and the
wireless LAN access point are located too far from each
other. If you do, place the devices closer to each other.
For details on the input values for the following
procedures, refer to the operating manual of the
respective device or the information provided by your
Internet provider.
1
Press SETTINGS on the unit.
The Settings menu appears in the display.
2
Select [Network setting] – [Manual
setting] – [Connection setting]
– [Manual].
3
When “Change the wireless LAN
setting values?” appears, select [Yes].
The unit automatically starts searching for a
connectable wireless network (SSID).
4
Select the network name (SSID) from
the list or select [Direct input].
5
Follow the instructions that appear
in the display and set the necessary
items.
“Network name (SSID)” and “Security
setting” appear only if you selected [Direct
input] in step 4.
To enter text, press  /  repeatedly until the
desired letter or number appears, and then
press ENTER. Each time you press  /  , the
character type changes in the following order.
Numbers (0 to 9)  Uppercase alphabet
(A to Z)

Lowercase alphabet (a to z)

Symbols (!, “, #, $, …)
After selecting the character type (“0”, “A”, “a”,
or “!” is displayed), press and hold  /  until
the desired character appears.
Network name (SSID):
Enter the network name (SSID).
Security setting:
Select [WEP64/128bit], [WPA/WPA2], or
[None].
Network key:
Enter the network key (security key).
Hexadecimal number, ASCII code can be
used.
Address setting:
Select [Full automatic] or [Custom].

When you select [Full automatic]:
The unit automatically sets the IP address
and the DNS server, and then moves to the
display for step 6.

When you select [Custom]:
The display switches to the IP address
setting display.
Setting up the network manually