Sony Giga Juke NAS-SC500PK, Руководство по эксплуатации

Страница: 124 / 203

NAS-SC500PK.GB.4-114-863- 11 (1)
1
GB
Changing the unit’s settings
Setting the display
SETTINGS

/

/

/

/
ENTER
To change the display size on the
unit
You can select two display sizes.
1
Enter the Settings menu and select
[Basic settings] – [System setting].
The setting display appears.
2
Select [Wide zoom (16:9)] or [Normal
(4:3)] from the [Unit display] pull-
down menu.
3
Select [Close].
Note
Changing the screen size on the unit does not affect the
image output from the MONITOR OUT jack.
To set the screen saver
As in the case of a personal computer, you can set
a screen saver that will appear when no operation
is done for a while.
1
Enter the Settings menu and select
[Basic settings] – [System setting].
The setting display appears.
2
Select [On] from the [Screen saver]
pull-down menu.
On If no operation is done for
15 minutes, the screen saver
activates.

Off The screen saver does not
activate.
(  : Factory setting)
3
Select [Close].
To change the display design
You can select the display design on the unit.
1
Enter the Settings menu and select
[Basic settings] – [Screen setting].
2
Select [Type 1] or [Type 2] from the
[Select design] pull-down menu.
3
Select [Execute].
The display changes to the design you
selected.