Sony Giga Juke NAS-SC500PK, Руководство по эксплуатации

Страница: 106 / 203

NAS-SC500PK.GB.4-114-863- 11 (1)
10
GB
Setting up the IP address/
proxy server
You may have to set the IP address and proxy
server, depending on the specifications of the
Internet provider or the network setting (e.g.,
broadband router status, wireless LAN router
status).
For details on the input values in the following
procedures, refer to the operating manual of the
respective device or the information provided
by your Internet service provider.
To set the IP address manually
1
Enter the Settings menu and select
[Network setting].
2
Select [Manual setting].
3
Select [Wireless LAN setting] or
[Wired LAN setting].
4
Select [Address setting].
5
Select [All manual] for the [DHCP]
setting.
6
Enter the values provided by your
Internet service provider for [IP
address], [Subnet mask] and [Default
gateway].
Locate the cursor over the parameter, and
press

/

to enter each digit.
IP address A numeric address that is
assigned to each device in a
network.
Subnet mask A value used to delimit a
network by defining the range
of assignable IP addresses.
Default
gateway
A device (such as a computer
or broadband router) on
a network that serves as
a gateway for accessing
another computer outside of
the network. This device is
specified by an IP address.
7
Select [Apply].
8
Select [Close].
Tip
To restore the previous setting, select [Undo] before doing
step 7.
To set up a proxy server
1
Enter the Settings menu and select
[Network setting].
2
Select [Manual setting].
3
Select [Wireless LAN setting] or
[Wired LAN setting].
4
Select [Proxy setting].
5
Change the [To Internet] setting to
[Connection via proxy].
6
Enter the address that have been
given from the Internet service
provider for [Proxy server] and
number for [Port].
7
Select [Close].