NAS-E300HD.GB.4-115-698-
11
(1)
1
GB
storage device. When “TitleUpdater.exe” is run on
your computer, the files “import.dat”, “ecddb.reg”
and “Cupd.ini” are created in the root directory of
the USB storage device. To completely delete the
“Title Updater” software from the USB storage
device, you should delete these 5 files from the
USB storage device. (“Cupd.ini” file may not be
created.)
To set up a network connection on
your computer
1
Double-click [TitleUpdater.exe] in
the root directory of the USB storage
device.
Title Updater starts.
2
Click [Conn.set].
The network connection setup display
appears.
When using Internet Explorer
Check [Use settings of Internet Explorer] and
click [Setting].
Title Updater connects to the Internet using
the Internet Explorer settings. (There is no
need to make any further settings.)
When using another browser
Uncheck [Use settings of Internet Explorer]
and do the following.
To select the connection method
You can select either a LAN ([Use LAN
connection]) or dial-up ([Use Dial up
connection]) connection to search online
for title information.
For a dial-up connection, select the access
point (Internet service provider node) in
the combo box.
If you check [Auto end connection
upon title retrieval], the connection is
automatically ended after title information
is obtained from the Web.
When using a proxy server
Check [Use proxy server] and make the
settings below.
— [Server]
Enter the proxy server address.
(e.g., 190.225.254.22)
— [Port No.]
Enter the port number of the proxy
server.
(e.g., 8080)
Note
If you make any changes to the proxy server settings,
restart the “Title Updater” software.
When using a dial-up connection
When you select [Use Dial up connection]
and start the online search, a dial up
connection setting window appears. Make the
following settings.
[Con.dest.]
Select the destination remote host (Internet
service provider node) from the combo
box.
[User name]
Enter the user name for connecting to the
remote host.
[Password]
Enter the password for connecting to the
remote host.
Click [Connect] to make the dial-up
connection.