Sony FST-ZUX9 - Mini Hi-fi Component System Скачать руководство пользователя

Страница: 55 / 60

Ad
di

on
al

rmati

Protected!

The USB device is write-protected.

Push STOP!

You tried to perform an operation that can
be performed only when the playback is
stopped.

REC Error!

Recording did not start, stop halfway or
otherwise could not be performed
(page 50).

Removed

The USB device has been removed.

Step Full!

You tried to program more than 25 tracks
(steps).

Track Full!

You cannot record onto the USB device
because the number of track has reached
its maximum.

Folder Full!

You cannot record onto the USB device
because the number of folder has reached
its maximum.

Device Full!

The memory of the USB device is full.

Precautions

Discs that this system CANNOT play
back

• Discs of non-standard shape (for example,

heart, square, star).

• Discs that have adhesive tape, paper, or

sticker attached to them.

• Rental or used discs with attached seals where

the glue extends beyond the seal.

• Discs that have labels printed using ink that

feels tacky when touched.

Notes on discs

• Before playing, wipe the disc with a cleaning

cloth from the center out to the edge.

• Do not clean discs with solvents, such as

benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.

• Do not expose discs to direct sunlight or heat

sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.

On safety

• The system is not disconnected from the AC

power source (mains) as long as it is
connected to the wall socket, even if the
system has been turned off.

• Completely disconnect the power cord (mains

lead) from the wall socket (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.

• Should any solid object or liquid get into the

system, unplug the system, and have it
checked by qualified personnel before
operating it again.

• The AC power cord can be changed only by a

qualified service facility.

Continued

Содержание FST-ZUX9 - Mini Hi-fi Component System





























































Результаты поиска

Содержание FST-ZUX9 - Mini Hi-fi Component System

Отзывы:

Похожие инструкции для FST-ZUX9 - Mini Hi-fi Component System

Бренды по названию

Популярные бренды

Sony FST-ZUX9 - Mini Hi-fi Component System, Руководство по эксплуатации

Результаты поиска

Содержание FST-ZUX9 - Mini Hi-fi Component System

Отзывы:

Похожие инструкции для FST-ZUX9 - Mini Hi-fi Component System

Бренды по названию

Популярные бренды