masterpage:Left
filename[G:\_Upload\3073074111\307307411MVCFD100UC\02GB-
MVCFD100UC\04bas.fm]
42
model name1[MVC-FD100/200]
[3-073-074-11(1)]
Viewing images using
“ ImageMixer”
You can easily view a still image and/or moving image recorded by your camera
using the “PIXELA ImageMixer Ver.1.0 for Sony” provided on the CD-ROM
supplied with your camera.
The system requirements of your computer are indicated in the operation manual
supplied with the CD-ROM.
Before operation
If you are using Windows 2000 and Windows XP, log in as an administrator and then
install the USB driver.
Installing “PIXELA ImageMixer Ver.1.0 for Sony”
1
Turn on your computer.
Close all applications you are running on your computer.
2
Insert the supplied CD-ROM in the CD-ROM drive of your
computer.
The title screen appears after a moment.
If the title screen does not appear
1
Double-click “My Computer” on the Desktop.
2
Double-click the CD-ROM (“ImageMixer (E:)*).
∗
The drive symbol ((E:), etc.) may differ depending on your computer.
3
Select “PIXELA ImageMixer Ver.1.0 for Sony” in the title screen.
For Windows users
1
Click “PIXELA ImageMixer” and install the software in
accordance with the instructions displayed on the screen.
After confirming the information in the “Readme.txt” screen displayed at
the end of installing process, close this screen and click “Finish.”
If you are using Windows XP, skip steps 2 to 4 below. Go to
step
4
.
2
Click “DirectX” in the title screen.
The “Microsoft DirectX8.0 Setup” screen appears.
3
Click “Yes.”
The “DirectX(R) Setup” screen appears.
4
Click “Install.”
The installation starts. When the installation finishes, click “OK” and
restart your computer.
01cov.book Page 42 Thursday, November 29, 2001 1:20 PM
