Sony ExwaveHAD DXC-C33P, Инструкция по эксплуатации, Страница: 26 / 194

GB 26
Shooting
Each time the lighting condition changes, be
sure to adjust the white balance so that
optimum color reproduction is obtained.
1
Press the MENU button to display
the MAIN menu.
2
Select the WHITE BALANCE menu,
and set MODE to AWB.
For menu operation, see “Operation
Through Menus” on page 12.
3
Select AREA with the
V
or
v
button
and then set it to NORMAL with the
B
or b button.
A detecting window appears.
For more details, refer to “WHITE
BALANCE Menu” on page 17.
4
Display the camera image on the
monitor screen.
If a color bar signal is displayed on the
screen, press the BARS button to turn it off.
5
Set the lens iris control to the
appropriate opening value.
6
Place a white object (white pattern,
white cloth, etc.) under the same light
condition as that falling on the object
to be shot, then zoom in on the white
object to fill the detecting window on
the screen.
• Do not include highly reflective objects in
the picture.
• Always shoot the image under suitable
lighting conditions.
7
Press the MENU button twice to
remove the menu.
8
Press the WHITE button.
During adjustment the bars appear. The
message “WHITE: OK” appears on the
screen when the adjustment is done.
The adjusted white level is
automatically stored in memory and
remains even if the power of the camera
is turned off.
To shoot under the same conditions, the
stored white balance is recalled by
setting MODE to AWB in the WHITE
BALANCE menu.
Adjusting the White Balance
FREEZE
BARS
BLACK MENU
AE AREA
SELECT
ENTER LOCK
SCENE FILE
SELECT WHITE
2 2,3 8 1,7
BARS
button
<WHITE BALANCE>
>MODE
R. PAINT
B. PAINT
AREA [A]
AWB
0
0
NORMAL
+ _
+
_
Select Back
MENU
<WHITE BALANCE>
MODE
R. PAINT
B. PAINT
>AREA
[A]
AWB
0
0
NORMAL
+ _
+
_
Select Back
MENU
Note
Notes