114
Copy cannot be done correctly using the HDMI cable.
• You cannot copy movies using the HDMI cable.
The camcorder is not receiving a GPS signal.
• Your camcorder may not be able to receive radio signals from GPS satellites because of
obstructions. Bring your camcorder to an open area. For details on places where radio signals
do not reach, see page 121.
• When you use the camcorder where it is difficult to receive GPS signals, try the triangulating
priority mode (p. 59).
The triangulating location is different from the actual current location.
• If your camcorder receives the radio signal reflected by surrounding buildings, or weak radio
signals, the margin of error can be as wide as several-hundred meters, at a maximum.
The computer does not recognize the camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
connect your computer and camcorder following the steps in the correct order.
Movies cannot be viewed or copied to the computer.
• Disconnect the cable from the computer, then connect it again.
• You need to install the supplied “Content Browser” to copy movies from your camcorder to
your computer.
GPS
Connecting to a computer
Troubleshooting (Continued)
