5-33
SEL200600G
(2) PRESET2 ADJ
• Perform focus actuator inspection.
Subject
Not required
Operation on Lens side
Not required
Shooting Mode of the camera P mode (Program Auto)
Adjusting Method
1. Click the [PRESET2 ADJ] button in the Adjustment and Inspec-
tion.
2. Automatically starts the focus actuator inspection.
3. When focus actuator inspection is completed, “PRESET2 AD-
JUSTMENT OK” is displayed.
4. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and “ [LENS PRESET2 ADJUST OK]” is displayed in the
message area when the process is completed.
20. When the ENTER key is pressed, message screen is displayed
in the following. Set the zooming ring to the TELE end (focal
length: 600 mm).
Zooming ring
21. When the ENTER key is pressed, automatically starts the each
adjustments and inspections (mechanical end adjust, PWM ad-
just, electric current self-diagnosis, actuator damage inspection).
22. After the each adjustments is completed, starts the horizontal
adjustment. “Place the lens horizontally.” is displayed, check
that the lens is horizontal.
23. When the ENTER key is pressed, automatically starts the hori-
zontal adjustment.
24. When horizontal adjustment is completed, “PRESET ADJUST-
MENT OK” is displayed.
25. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automati-
cally, and “ [LENS PRESET ADJUST OK]” is displayed in
the message area when the process is completed.
SYS SET
2019/06/28 22:04:56 (GMT+09:00)
