SEL16F28 (E 16mm F2.8)
2-3E
HELP
Note for assembling and grease applying positions are shown.
1. Stick Adhesive Tape on Optics Unit Assy, then remove the release coated paper.
2. Assemble Front Barrel B to Optics Unit Assy by fitting their convexoconcave.
Grease (SG-310): 9-913-200-36
1. Apply grease (SG-310) on the three places of Mount as shown below.
Optics Unit Assy
Front Barrel B
Apply grease (SG-310)
Mount
Grease (G-85): J-6082-626-A
Grease (SG-310): 9-913-200-36
1. Apply grease (G-85) at two places and grease (SG-310) at one place of Focus Outer Barrel Assy.
Apply grease (G-85)
Apply grease (SG-310)
Focus Outer Barrel Assy
Apply grease (G-85)
2. Assemble Focus Outer Barrel Assy by fitting the teeth to slit of PI.
Note:
Take notice that do not move PI.
Focus Outer
Barrel Assy
PI