20
UTILITY Menu
Resetting the accumulated time
indication
1
Hold down the SET button until the
time indication flashes.
2
Press the – button so “00:00 RESET”
appears, and then press the SET
button.
Setting the Brightness of
the Display
(BRIGHTNESS)
Ten levels of brightness can be selected for
the organic light-emitting diode display.
The selectable settings are the following:
(Dark)
1 2 3 4 5 6 7 8 9 10
(Bright)
Automatic Dimming of the
Display
(DIMMER MODE)
The organic light-emitting diode display
can be set to dim or turn off after a certain
amount of time.
AUTO OFF:
The display turns off after 30
seconds. The display goes on again when
you press the SET, +, or – button.
AUTO DIMMER:
The display dims after
30 seconds. The display becomes bright
again when you press the SET, +, or –
button.
ALWAYS ON:
The display stays on at the
brightness level set with the BRIGHTNESS
function.
Resetting Parameters to
their Factory Settings
(FACTORY PRESET)
All parameter settings can be returned to
their factory settings.
Holding down the SET button until a
message appears asking for confirmation.
Press the + or – button repeatedly to select
YES, and then press the SET button to
enter. The receiver parameters are reset to
their factory settings.
Displaying the Software
Version
(VERSION)
The version of the receiver software can be
displayed.
Содержание DWRS02D/14
Страница 36: ...Sony Corporation ...