Sony DWM-02, Руководство по эксплуатации

Страница: 17 / 36

17 Using the Encrypted Transmission Function
Using the
Encrypted
Transmission
Function
To prevent hacking of the signal, the
microphone scrambles the signal during
transmission. To use this function, select
one of the following encrypted transmission
modes:
Secure key mode: An encryption key
that is automatically generated by the
microphone is used by both the microphone
and receiver in this one-to-one encrypted
transmission method.
Password mode:
You choose a
password of up to eight characters that can
be set for multiple microphones/
transmitters and receivers. This enables
encrypted transmission within a group.
Make sure the same mode is set on the
microphone/transmitter and receiver.
Using Secure Key Mode
(SECURE KEY)
Use this mode for one-to-one encrypted
transmission between one microphone and
one receiver.
An encryption key that cannot be read from
the outside is automatically generated by
the microphone. This key is transmitted to
the receiver through a USB connection or
the RF REMOTE function, enabling
encrypted transmission to take place.
The encryption key used by the microphone
and receiver is newly generated for each
key transmission, resulting in highly secure
communication.
The encryption key used between the
microphone and the receiver is saved when
the power is turned off, so the encrypted
transmission can be resumed the next time
the power is turned on.
1
Preparing the microphone (this unit)
1
Hold down the SET button until
the item to be set flashes in
ENCRYPTION indication on the
microphone.
2
Press the + or – button repeatedly
to select SECURE KEY, and then
press the SET button.
2
Preparing the receiver
Select SECURE KEY on the receiver
that receives the encryption key.
For details on receiver operations, refer to the
operating instructions supplied with the
receiver.
3
Exchanging the encryption key
On the receiver, select USB or
REMOTE (wireless remote) as the
method for encryption key exchange.
When the RF REMOTE function is
off, REMOTE cannot be selected.
When the receiver does not support
encryption key exchange through USB
connection, select REMOTE.
For details on the receiver, refer to the
operating instructions supplied with the
receiver.
When you select USB:
Connect the microphone to the
receiver with the supplied USB cable
and USB adapter cable.
Note
Note