Sony DVP-PR30, Руководство по эксплуатации

Страница: 9 / 40

9
H
ook
up
s
Hookups
When unpacking, check the supplied accessories by referring to page 36.
b
• Plug cables securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Be sure to disconnect the mains lead of each component before connecting.
Step 1: Connecting to Your TV
Connect this player to your TV monitor, or projector using an audio/video (SCART) cable. This
connection will use your TV speakers for sound.
SCART input jack
Be sure to make the connections firmly to
avoid hum and noise.
When using this connection, check that the
TV conforms to S video or RGB signals.
Refer to the operating instructions supplied
with the TV to be connected. Also, when you
set “LINE” to “S VIDEO” or “RGB” under
“SCREEN SETUP” in the Setup Display
(page 28), use a SCART cable that conforms
to each signal.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 28.
b
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen.
• When you connect the player to your TV via the
SCART jack, the TV’s input source is set to the
player automatically when you start playback. In
this case, press TV
t (input select) on the
remote to return the input to the TV.
DIGITAL OUT COAXIAL LINE(RGB)-TV
L C E N T E R
INPUT
TV
l : Signal flow
CD/DVD player
to LINE (RGB)-TV
SCART cable
(not supplied)
When you play a disc recorded in the NTSC
colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC
colour system and the picture may not
appear on the PAL colour system
televisions. In this case, open the disc lid
and remove the disc.
, continued