Sony DVP-NS300, Руководство по эксплуатации

Страница: 30 / 76

30
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
4
Press A on the player, and place a
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
5
Press H .
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 33), VIDEO CD (page
34).
To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press
^
/
1
on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing
A on the player or by
pressing
H
.
To turn off the player
Press ^ / 1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press
x
to stop playback and then press
^
/
1
on the remote.
POWER
A H
Power indicator
[ / 1
H
x
(audio)
x
With the playback side facing down