11
Searching a track by listening to
track passages — ZAPPIN™
While playing back short track passages in a
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press
(ZAP/SHUF)
during playback.
After “ZAPPIN” appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
2
Press the select button or
(ZAP/SHUF)
when a track you want to listen is
played back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
Tips
•
You can select the playback time from about 6
seconds/15 seconds/30 seconds (page 19). You
cannot select the passage of the track to playback.
•
Press +
>
/–
.
in ZAPPIN mode to skip a track.
•
Pressing
(BACK) also confirms a track to
playback.
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press
(SOURCE/OFF)
repeatedly until
“TUNER” appears.
To change the band, press
(MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold the select button.
The setup display appears.
3
Press the select button repeatedly
until “BTM” appears.
4
Press +
>
.
The unit stores stations in order of frequency
in the preset list.
A beep sounds when the setting is stored.
Storing manually
1
While receiving the station that you
want to store, press
(BROWSE).
The preset list appears.
2
Rotate the control dial to select the
preset number.
3
Press and hold the select button until
“MEMORY” appears.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (page 12).
Receiving the stored stations
You can select a station to receive via a list.
1
Select the band, then press
(BROWSE).
The preset list appears.
2
Rotate the control dial until the
desired station appears.
ZAP
Select button
(BACK)
The part of each track to
playback in ZAPPIN mode.
Track
continue to next page
t
