10
Card remote commander
RM-X151
Remove the insulation film before use (page 6).
A
OFF button
To turn off; stop the source.
B
SOURCE button
*
1
To turn on; change the source (Radio/USB/
AUX).
C
<
(
.
)/
,
(
>
) buttons
To control Radio/USB, the same as –
.
/
+
>
on the unit.
Setup, sound setting, etc., can be operated by
<
,
.
D
DSPL (display) button
To change display items.
E
VOL (volume) +
*
2
/– button
To adjust volume.
F
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
G
SEL (select) button
The same as the select button on the unit.
H
MODE button
*
1
Press to select the radio band (FM/AM).
I
M
(+)/
m
(–) buttons
To control USB, skip albums.
Setup, sound setting, etc., can be operated by
M
m
.
J
SCRL (scroll) button
To scroll the display item.
K
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
If an HD Radio tuner or SAT tuner is connected:
when
(SOURCE)
is pressed, the connected device
(“HD,” “XM” or “SR”) will appear in the display.
Furthermore, if
(MODE)
is pressed, you can switch
the HD Radio tuner band or SAT tuner band.
*2
This button has a tactile dot.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE/OFF)
on the unit is pressed to
activate the unit first.
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
2
7
8
1
q;
3
4
6
5
qa
9
