33
GB
Messages
The following messages may appear or flash during
operation.
INVALID
The selected operation could be invalid.
[USB MODE] cannot be changed during iPod
playback.
READ:
Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
(underscore):
The character cannot be
displayed.
For USB device playback:
HUB NO SUPRT:
USB hubs are not supported.
IPD STOP:
iPod playback has finished.
Operate your iPod/iPhone to start playback.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA (Android Open
Accessory) 2.0 is connected to the unit while [USB
MODE] is set to [ANDROID].
Set [USB MODE] to [MSC/MTP] (page 23).
USB ERROR:
The USB device cannot be played.
Connect the USB device again.
USB NO DEV:
A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC:
There is no playable file.
Connect a USB device containing playable files
(page 27).
USB NO SUPRT:
The USB device is not supported.
For details on the compatibility of your USB
device, visit the support site on the back cover.
OVERLOAD:
The USB device is overloaded.
Disconnect the USB device, then press SRC to
select another source.
The USB device has a fault, or an unsupported
device is connected.
For BLUETOOTH function:
BTA NO DEV:
The BLUETOOTH device is not
connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
ERROR:
The selected operation could not be
performed.
Wait for a while, then try again.
UNKNOWN:
A name or phone number cannot be
displayed.
WITHHELD:
The phone number is hidden by the
caller.
For Sony | Music Center operation:
APP ––––––––:
A connection with the application is
not established.
Make the “Sony | Music Center” connection again
(page 20).
APP DISCNCT:
The application is disconnected.
Make the “Sony | Music Center” connection
(page 20).
APP DISPLAY:
A screen setting display of the
application is open.
Exit the screen setting display of the application
to enable button operation.
APP LIST:
The contents list of the USB is open.
Exit the list of the application to enable button
operation.
APP MENU:
A setting display of the application is
open.
Exit the setting display of the application to
enable button operation.
