DSLR-A450
4-159-241-
11
(1)
G:\Works\CX85900\DTP\4159241111\4159241111DSLRA450U2\01GB-
DSLRA450U2\100PRT.fm
Master:
L0.Right
Printing images
143
Printing images
Specifying DPOF
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying /unspecifying DPOF on selected images
1
MENU button
t
1
t
[Specify Printing]
t
[DPOF setup]
t
[Marked images]
t
[OK]
2
Select the image with
b
/
B
on the controller.
3
Select the number of sheets with the center of the controller.
• To unspecify DPOF, set the number to “0.”
4
Press the MENU button.
5
Select [OK] with
v
on the controller, then press the center of
the controller.
