60
Using the
(Drive) button
You can use continuous shooting, self-timer, bracket, white balance bracket with the
(Drive) button.
1
Press the
(Drive) button.
2
Select the desired mode with
b
/
B
on the
controller.
• You can substitute the control dial for
b
/
B
of the controller.
3
Select the desired mode with
v
/
V
on the
controller.
• This setup is not required in single-frame or continuous
advance.
4
Press the center button of the controller to complete the operation.
• If you press the
button or press the shutter button halfway down, the setting is completed.
How to use the
(Drive) button
(Drive) button
Controller
Center button