[292] Troubleshooting
Troubleshooting
Battery pack and power
The product gets hot.
When the product is used for a long time, the temperature of the product will
rise. If the product gets too hot, movie recording may be interrupted or the
power may turn off automatically to protect the product.
[293] Troubleshooting
Troubleshooting
Battery pack and power
The remaining battery level indicator shows an incorrect
level.
This phenomenon occurs when you use the product in an extremely hot or cold
location.
There may be a difference between the remaining battery level indicator and
the actual remaining battery charge. Deplete the battery pack once, then
charge it so that the remaining battery level indicator is reset. The correct
remaining battery level indicator may not be displayed under some operating or
environmental conditions.
Battery capacity decreases over time and through repeated use. If decreased
usage time between charges becomes significant, it is probably time to replace
it with a new one.
[294] Troubleshooting
Troubleshooting
Battery pack and power
The charge lamp on the product flashes when charging
the battery pack.
Make sure that the battery is NP-FW50.
Remove the battery pack and then reinsert it into the product.
Batteries which have not been used for more than a year may have