Sony DSC M2 - Cybershot 5.1MP Digital Camera, Руководство по эксплуатации

Страница: 45 / 107

45
Us
ing th
e
m
enu
For details on the operation
t
page 36
To cancel the protection
In single-image mode
Press z in step
3
or
4
of “To protect images in single-image mode.”
In index mode
1
Select the image for which you want to remove protection in step 5 of “To protect images in
index mode.”
2
Press
z
to turn the - indicator gray.
3
Repeat the operation above for all images to be unprotected.
4
Press MENU, select [OK] with
B
, and then press
z
.
To cancel protection of all images in the folder
Select [All In This Folder] in step
4
of “To protect images in index mode,” and press z .
Select [Off] with B , then press z .
• Note that formatting the recording media erases all the data stored on it, even if images are protected, and
these images cannot be recovered.
• It may take some time to protect an image.
Adds a (Print order) mark to images you want to print (page 79).
See page 76.
Plays back recorded images in order (Slide show).
Interval
DPOF
P S A M
(Print)
P S A M
(Slide)
P S A M
3 sec Sets the slide show interval.
5 sec
10 sec
30 sec
1 min