Using the Menu
80
NTSC PB
When you play back an NTSC color system video, select the available system of
your TV to play back the video with.
z
Tip
• When you play a tape back on a Multi System TV, select the best mode while you are
viewing the picture on the TV.
DATA CODE
REMAINING
REMOTE CTRL
b
Note
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
REC LED
G
ON PAL TV
Select to play the video back on a PAL system TV.
NTSC 4.43
Select to play the video back on a TV with an NTSC 4.43 mode.
G
OFF
Select not to display date, time and the camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 51).
CAMERA DATA
Select to display the camera settings data during playback (p. 51).
G
AUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch
(play/pause).
ON
Select to always display the remaining tape indicator.
G
ON
Select when using the Remote Commander supplied with your
camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
G
ON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.