Sony DR-BT101IK, Руководство по эксплуатации

Страница: 33 / 92

DR-BT101iK_U [US, ES] 4-139-303-11(1) DR-BT101iK_U [US, ES] 4-139-303-11(1)
US
To receive a call
When an incoming call arrives, a ring tone will be heard from the
headset.
1
Press the multi function button on the headset.
The ring tone differs in the following ways, depending on your
mobile phone.
– ring tone set on the headset
– ring tone set on the mobile phone
– ring tone set on the mobile phone only for Bluetooth connection
Note
If you received a call by pressing the button on the Bluetooth mobile phone,
some Bluetooth mobile phones may have handset use priority. In this case, set
to talk with the headset by pressing and holding the multi function button for
about 2 seconds, or by operating the Bluetooth mobile phone. For details, refer
to the manual supplied with your Bluetooth mobile phone.
To call
1
Use the buttons on your mobile phone when making a call.
If no dial tone is heard on the headset, press and hold the multi
function button for about 2 seconds.
 Tip
You can call in the following way, depending on the
Bluetooth
mobile phone. Refer
to the manual supplied with your mobile phone on operating details.
– When not communicating, you can call using the voice-dial function by pressing
the multi function button.
– You can call the last dialled number by pressing the multi function button for
about 2 seconds.
To terminate a call
You can end a call by pressing the multi function button on the headset.