32
GB
Printing from a Bluetooth-compliant device
Printing from a Bluetooth-
compliant device
By connecting the Sony DPPA-BT1 Bluetooth
USB adaptor to the PictBridge/EXT
INTERFACE connector of your printer, you
can print an image from a Bluetooth-compliant
mobile phone, digital camera, or other device.
Notes
• Do not use the DPPA-BT1 outside the area you
purchased it. Depending on the area, the use of the
adaptor may violate the local radio wave
regulations and may be subject to penalty.
• In some regions, the Sony DPPA-BT1 Bluetooth
USB adaptor is not sold.
The DPP-FP65/FP75 supports the following
profiles:
• BIP (Basic Imaging Profile)
• OPP (Object Push Profile)
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a “Profile”?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the
purposes and product to be used. To make
Bluetooth communication possible, the devices
used in the communicated should support the
same profile.
Compatible image file formats that can
be printed
Maximum number of pixels that can be
handled
8 000(H) × 6 000(V) dots (Maximum 3.5 MB
or less)
When printing from the PictBridge/EXT
INTERFACE connector, make sure to remove
memory card(s) from the printer in advance.
1
Connect the printer to the AC power
source.
2
Press the
1
(on-standby) button to
turn on the printer.
3
Insert the Bluetooth adaptor into the
PictBridge/EXT INTERFACE
connector of your printer.
Note
If any device, other than the Bluetooth adaptor,
such as a memory card, camera, PC, or other
USB memory or a USB cable is connected to
any of the memory card slots, the PictBridge/
EXT INTERFACE connector, or USB
connecter of your printer, disconnect it from the
printer and then connect the Bluetooth adaptor.
4
Print from the Bluetooth-compliant
mobile phone, or other device.
For printing procedures, refer to the
manual of your Bluetooth device.
Compatible profiles for
Bluetooth communication
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF (4:4:4, 4:2:2, 4:2:0
formats Baseline JPEG)
TIFF:
Exif 2.21 compatible
BMP:
1, 4, 8, 16, 24, 32 bit Windows format
Some image file formats are not compatible.
Printing procedures
Содержание DPP-FP65
Страница 69: ......
Страница 70: ......
Страница 71: ......
Страница 72: ...Sony Corporation Printed in China Printed using VOC Volatile Organic Compound free vegetable oil based ink ...