Sony DPP-FP65, Руководство по эксплуатации

Страница: 20 / 72

20 GB
Red-eye Correction
1
Display an image that you want to
adjust and then press
(Red-
eye Correction).
Red-eye Correction of the selected image
starts. The results of the adjustment will
be displayed on the screen.
To display the original image
(Before correction) again
Press (Red-eye Correction). To
display the adjusted image, press
again.
To cancel correction
Press CANCEL.
Tip
Although you can check the red-eye correction
status by pressing ENTER and enlarging an
image, the image to be printed is not enlarged.
To print an enlarged and red-eye-corrected
image, first enlarge an image and then perform
red-eye correction.
If you have set print quantity for
multiple images
All the images with print quantity settings
are adjusted. To display other images,
press
g / G .
To set the print quantity
Before you start red-eye correction, set the
print quantity (page 16). You cannot set or
change print quantity after you finish the
red-eye correction. To change the print
quantity setting, cancel the red-eye
correction.
Tips
• If there are no images with print quantity
settings, the Red-eye Correction adjusts the
image being previewed.
• If there are other images with print quantity
setting, and print quantity is not specified
for the image being previewed, the image
being previewed will not be corrected. The
images with print quantity settings will be
adjusted.
• If you enlarged an image, only the enlarged
image will be adjusted and then printed.
2
Press PRINT.
Printing of the image being adjusted starts.
When the print quantity setting is
specified, the specified number of copies
are printed.
Tips
• Adjustment takes effect only on the image being
printed. The original image will not be adjusted.
• You cannot perform editing on an image after
Red-eye Correction.
Notes
• Depending on the image, the red-eye phenomenon
may not be corrected.
• When you cancel the edits by selecting (Reset)
in the Edit menu, the Red-eye Correction will also
be cancelled.
• During the Red-eye Correction process, an
animation to show reading and handling of data
from a memory card or a USB memory will be
displayed. While the animation is displayed, do not
remove the memory card or disconnect USB
memory.
The automatic red-eye
correction of this printer uses
the technology of FotoNation
Inc. in the U.S.A.