44
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of “0:00:00”. Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(
1
)
In the playback mode, press DISPLAY.
(
2
)
Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows “0:00:00” and the ZERO SET MEMORY indicator flashes.
(
3
)
Press
p
when you want to stop playback.
(
4
)
Press
0
to rewind the tape to the tape counter’s zero point. The tape stops
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears and the time code appears.
(
5
)
Press
(
. Playback starts from the tape counter’s zero point.
Notes
•The zero set memory function works only for tapes recorded in the Digital8 system.
•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
•There may be a discrepancy of several seconds from the time code.
•The zero set memory function may not work when there is a blank portion between
pictures on a tape.
Quickly locating a scene using the zero
set memory function
ZERO SET MEMORY
DISPLAY
