41
Advanced Recording Operations
You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased. Use the Remote Commander for this operation.
(
1
)
While your camcorder is in the standby mode, keep pressing EDITSEARCH,
and release the button at the insert end point
[
b
]
.
(
2
)
Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and
the tape counter resets to zero.
(
3
)
Keep pressing the –
Œ
side of EDITSEARCH and release the button at the
insert start point
[
a
]
.
(
4
)
Press START/STOP to start recording. The scene is inserted. Recording stops
automatically at the tape counter zero point. Your camcorder returns to the
standby mode.
Notes
• The zero set memory function works only for tapes recorded in the Digita8 system.
• The picture and the sound may be distorted at the end of the inserted section when it
is played back.
If you re-record on the section which contains a non-recorded section
The zero set memory function may not work correctly.
When START/STOP MODE is set to or 5SEC
You cannot use the zero set memory function.
Inserting a scene
ZERO SET
MEMORY
[a]
[b]
EDITSEARCH
