69
GB
O
the
r O
p
erati
ons
You can adjust the speed of each X-ROUND
effect.
Press X-ROUND SPEED repeatedly
to adjust the speed of the selected
X-ROUND effect.
Each time you press the button, the display
changes cyclically as follows:
SPEED 1
t
SPEED 2
t
...
t
SPEED 19
t
SPEED 20
Note
When you select X-OFF, you cannot adjust the
speed.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
Index name of the input
t
Selected input
t
Selected X-ROUND mode.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press
V
/
v
repeatedly to select
“5-AUDIO” or “6-VIDEO”.
4
Press
or
b
to enter the
menu.
5
Press
V
/
v
repeatedly to select
“NAME IN”.
6
Press
or
b
to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 59).
Adjusting the speed of the
X-ROUND effect
Changing the X-ROUND display
