Sony DHC-FLX5D, Руководство по эксплуатации

Страница: 27 / 76

D
V
D/VIDEO CD/CD/Su
pe
r A
u
dio CD/MP3
27
GB
Select settings according to the connected TV.
Select “SCREEN SETUP” in the Setup
Display.
x TV TYPE (DVD only)
Select the aspect ratio of the connected TV.
• 16:9: Select this when you connect a wide-
screen TV or a TV with a wide mode function.
• 4:3 LETTER BOX: Select this when you
connect a 4:3 screen TV. This setting displays
a wide picture with bands displayed on the
upper and lower portions of the screen.
• 4:3 PAN SCAN: Select this when you
connect a 4:3 screen TV. This setting displays
the wide picture on the entire screen and cuts
off the portions that do not fit.
Note
Depending on the DVD, “4:3 LETTER BOX” may be
selected automatically instead of “4:3 PAN SCAN” or
vice versa.
x SCREEN SAVER
Turn on and off the screen saver. If you turn on
the screen saver, the screen saver image appears
when you leave the player in pause or stop mode
for 15 minutes or when you play a CD for more
than 15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press
hH
to turn off the
screen saver.
• ON: Turns on the screen saver.
• OFF: Turns off the screen saver.
x BACKGROUND
Select the background color or picture on the TV
screen when the playback is stopped or while
playing a CD.
• JACKET PICTURE: The jacket picture (still
picture) appears in the background, but only
when the jacket picture is already recorded on
the disc (CD-EXTRA, etc). If the disc does
not contain a jacket picture, the
“GRAPHICS” picture appears.
• GRAPHICS: The preset picture stored in the
system appears in the background.
• BLUE: The background color is blue.
• BLACK: The background color is black.
x COMPONENT OUT
This will change the type of signal output from
the COMPONENT VIDEO OUT jacks on the
player.
• INTERLACE: Select this setting when you
are connected to a standard (interlace format)
TV.
• PROGRESSIVE: Select this when you have a
TV that can accept progressive signals.
To force the system to switch to interlace
when PROGRESSIVE is selected
Make sure the function is set to DVD, then hold down
DVD and press DISPLAY.
Notes
• “PROGRESSIVE” does not work for PAL signals.
Even if you set “COMPONENT OUT” to
“PROGRESSIVE”, the output signal is
automatically switched to interlace format for PAL
signals.
• When “COMPONENT OUT” is set to
“PROGRESSIVE”, no video signal is output from
the VIDEO OUT or S VIDEO OUT jacks.
Settings for the display
— SCREEN SETUP
SCREEN SETUP
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT: ON
JACKET PICTURE
INTERLACE
TV TYPE: 16:9