Sony DG510 - STR AV Receiver, Руководство по эксплуатации

Страница: 8 / 72

8 GB
About the indicators on the display
SW LFE
SP A
SP B
L C R
SL S SR
;
D
;
PLII
;
PL OPT DTS MEMORY RDS ST
MONO D.RANGE COAX
1 2 3 4 5 6 7 9 8
q; qa qs qd
Name Function
A
SW Lights up when sub woofer
selection is set to “YES” (page
42) and the audio signal is
output from the SUB
WOOFER jack.
B
LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C
SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if headphones are
connected.
D
; D Lights up when the receiver is
decoding Dolby Digital
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 58).
Name Function
E
; PL/
; PLII
“ ; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“
;
PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
However, these indicators do
not light up if both the center
and surround speakers are set to
“NO” (page 38) and you select
a sound field using the A.F.D.
button.
F
OPT Lights up when VIDEO 2 input
is selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack. “OPT” also lights up
when SAT input is selected if
– INPUT MODE is set to
“AUTO IN” and the source
signal is a digital signal being
input through the OPTICAL
jack.
– INPUT MODE is set to “OPT
IN” (page 58).
G
DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
“ANALOG” (page 58).