Sony DCR-VX2200E, Руководство по эксплуатации

Страница: 86 / 112

86
(Warning indicator
pertaining to battery pack
temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
(Warning indicator pertaining to
battery pack temperature)
• The battery pack is too cold. Replace
the battery pack, or remove it and put it
in a warm place.
Q
(Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted.
• The write-protect tab on the cassette is
set to lock (p. 89).
Fast flashing:
• The tape has run out.
Z (Eject cassette warning)
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 89).
Fast flashing:
• Moisture condensation has occurred
(p. 94).
• The self-diagnosis display code is
displayed (p. 85).
-
(Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo” media)
• The write-protect tab on the “Memory
Stick Duo” media is set to lock (p. 90).
z
Tips
• You will hear a beep when certain messages
appear on the screen.
If messages appear on the screen, follow the
instructions.
x Battery/Power
Cannot use this battery in the
camcorder.
(p. 91)
x Moisture condensation
%
Z
Moisture condensation. Eject
the cassette (p. 94)
%
Moisture condensation. Turn off
for 1H.
(p. 94)
x
Cassette/Tape
Z Reinsert the cassette. (p. 19)
• Check if the cassette is damaged.
Q
Z The tape is locked - check the
tab.
(p. 89)
x “Memory Stick Duo” media
Reinsert the Memory Stick.
(p. 19, 90)
• Reinsert the “Memory Stick Duo”
media a few times. If even then the
indicator flashes, the “Memory Stick
Duo” media might be damaged. Try
with another “Memory Stick Duo”
media.
This Memory Stick is not
formatted correctly.
• Check the format, then format the
“Memory Stick Duo” media as
necessary (p. 68, 90).
Description of warning messages
Warning indicators and messages (Continued)